Measurement parameter and Range

Inductance

Capacitance

Resistance

Impedance

Admittance

Dissipation factor

Quality

Equivalent series resistance

Equivalent parallel resistance

Conductance

Reactance

Susceptance

Phase Angle

Measurement terminals

Coaxial BNC connectors: FORCE (2), SENSE (2)
Binding post: GUARD (1)

basic accuracy

0.1%

Measurement frequency

42Hz~5.00MHz (±0.01%)

Measrement signal level

0.01~5.00Vrms/0.01~99.99mA rms
(42.0Hz~1.00MHz)
0.05~1.00Vrms/0.05~20.00mA rms
(1.01~5.00MHz)

Signal source impedance

50

Measurement speed

18msMIN (at 10kHz)
20kHz~5.00MHz 40ms max
42Hz~19.0kHz 40ms ~

Measurement circuit mode

Series equivalent or Parallel equivalent.

Zero correction

You can automatically correct parasitic impedance with the circuit open or short-circuited for zero balancing. Zero correction in open mode is executable with 1k or higher and that in short mode, with less than 1k

Memory

9 testing conditions storable in memory

GO/NO Judgment

High/low limits can be set in a range of 00000 to ±19999 and each subject device can be classified into 10 sorts according to the judgment (absolute value or percentage).

Display

DISP-A/DISP-B
4-1/2digit display

Judgment results output

DISP-A/DISP-B LO, HI, GO, TOTAL GO, TOTAL NO-GO; BUZZER ON (Isolated)

Output signals

MEASURE END, TEST BUSY, BIN, ERROR (Isolated)

Guaranteed temperature range

23°C ±5°C (Specified accuracies are guaranteed in this temperature range. In a range of 5°C to 40°C, limits of accuracy are doubled.)

External control signals

CONTROL PANEL/EXT, EXT TRIGGER, PANEL No (Isolated)

Signals

RS-232C standard provision

Operating temperature range

0~50°C

Power requirements

100/120/220/240V AC ±10%, 50/60Hz; approx. 60VA

Dimensions & Mass

250(W) x 148(H) x 400(D) mm, approx. 7kg

Options

Test adapter (KCA-06, KCA-07,KCA-08, KCA-09N),
BCD Board(KCB-51),
GP-IB Board (KCG-62)